Installing aftermarket racing seats in your vehicle can be one of the most rewarding modifications you can do to your vehicle. The process is simple and straightforward, and the results are both pleasing and prominent. A good set of aftermarket seats will hold you snugly in place while providing a soft, compliant ride. They look great too! However, the actual process can be daunting and intimidating. Although the installation is normally not very difficult, not knowing exactly what to expect can nerve-wrecking for even the most mechanically-inclined enthusiast. Thankfully, we’ve made a guide to help you through this process.
What You'll Need:
If you have everything above handy, you’re ready to install your seats! The steps listed below cover the process for installing one aftermarket seat, but the process is the same for both sides. After you finish one side just repeat the same process for the other side.
Assemble Your New Seats (bottom mount):
The first thing you should do is attach your seat brackets and (if applicable) sliders to your new aftermarket seats.
Assemble Your New Seats (side mount):
The first thing you should do is attach your seat brackets, side mounts, and (if applicable) sliders to your new aftermarket seats.
Remove the Factory Seat:
Install Your New Seat: