IRON BULL'S BASE BUMPER
The base bumper's, standard features include, four five inch Round light hole buckets or two five inch Round light hole buckets (depending on your model), a winch plate to mount any winch you want and the"welded through" d-rings to mount any 3/4" shackles. (Lights, winch, and shackles not included with bumpers) When they say "welded through" that means a slot is cut in the front plate and the D-ring is inserted and welded on the inside and out. Iron Bull Bumpers are the only company that does this. Other bumper companies just put the D-ring on front plate without cutting a slot and weld it once on the outside of the bumper.
The base bumper is constructed from a sheet of 3/16" plate steel, each piece cut out as it's own, so there is no press braking to ensure maximum strength. Then each piece is jigged into place and fully hand welded from the inside, out, ground to a smooth, but strong finish then coated with our "Black Shield" coating. Iron Bull Bumpers take the extra time to fully weld our bumpers unlike other bumper companies that press brake most of the bumper and stitch weld in only a few places, our bumpers are made to be used and abused not just to look pretty.
Most bumper companies use powder coating or liquid paint as a finish on their bumpers, but they are the only ones to use what is called the "Black Shield" coating. It's a premium bed liner like Rhino lining ® or Line-X ®. Unlike powder coating and liquid paint "Black Shield" will not chip off or crack from rocks, instead, our coating repels the rocks.
REAR BASE BUMPER
Iron Bull Bumpers rear bumpers are just as strong and good looking as the front and include cut outs for your factory license plate lights, trailer plug, and sensors(if you have them). About 99% of their rear bumpers are able to use your stock factory receiver hitch, but that 1% of trucks have their factory receiver hitch as a part of the stock bumper so it must come off. If your truck is a part of this 1%, no need to worry because we welded in hitch included for these trucks and will be stated in the description if your truck is in that 1%.
CUSTOMIZATION
Iron Bull Bumpers base bumpers can be customized to your needs.
Iron Bull Bumpers "Heavy Duty" Grille Guards feature 2" 1/8th wall tubing bent and welded to base bumper. The "Extreme Duty" features 2 1/2" 3/16ths wall Schedule 40 Gas Pipe cut and welded rather than bent and welded to the base bumper, these bars will resist the toughest environments you'll encounter. And the "Specialty" Grille Guards feature some of their most innovated designs yet with both 32" and 42" curved light bars concealed in a strong box that can take a hit called "32" and 42" Extreme Vetting" bars. And triple plated ram horns called "Reaper".