Name: Tie Down Engineering® 81085 - 1350 lb Idler Trailer Hub Kit with Nuts for 1-1/16" Straight Spindles
Brand: Tie Down Engineering
SKU: mpn4649535767
Price: 81.74 USD
Availability: InStock

Vehicle Fitment

This part is universal

Product Details

1350 lb Idler Trailer Hub Kit with Nuts for 1-1/16" Straight Spindles by Tie Down Engineering®. 5 - 1/2"-20 studs with lug nuts on a 4.5" bolt pattern. Hub assembly comes pre-greased with Lucas Red N Tacky grease providing wear protection in tough marine environments. This superior product is perfect to make your trailer towing experience safe and convenient. Designed to meet the highest quality standards, it is 2nd to none in durability and performance. Made using the finest materials, it is sure to serve you reliably for a long time.

Specifications

Capacity: 1350 lb

Inner Bearing Code: L44649

Inner Race Code: L44610

Outer Bearing Code: L44649

Outer Race Code: L44610

Seal Code: 125255UC

Finish: Black Painted

Includes

Bearings
Seals
Dust cap
Cotter pin
Lug nuts

Features

100% of hub cavity pre-greased with Lucas Red N Tacky grease
Black Painted Finish
Premium, bullet-proof strong parts for your trailer.

Looking to make trailer towing safer and easier? There's no need to look anywhere else other than our comprehensive selection of trailer accessories. Whether you want to use your truck's space to the fullest or are in search of reliable solutions for proper trailer attachment, we have it all. On our website you can find everything you need to convert your truck into an all-out work horse. All trailer accessories we offer are made by renowned manufacturers who use the finest materials to ensure their products provide unparalleled quality and reliability. Designed to endure the harshest conditions, they are proven to perform for years to come. Enjoy worry-free towing wherever you go with our top-grade trailer accessories!

Tie Down Engineering’s® commitment to excellence has taken it from a simplistic garage operation in 1969, to it’s current 560,000 sq. ft. manufacturing facilities servicing 6 product divisions and over 7,000 individual products. Quality products, emphasis on customer service, technological awareness, high productivity and capital investments are the corner stones of Tie Down Engineering’s philosophy. This commitment to excellence by the Tie Down Engineering employees and management teams, when coupled with their “high operating leverage” investment philosophy, produces a manufacturing combination that will satisfy the most discerning consumer. They sincerely hope that you will join with Tie Down Engineering on continued journey for growth and excellence.

Brand:

Tie Down Engineering

Part Number:

81085

UPC:

081628810851

Installation

Tie Down Engineering® - Idler Trailer Hub Kit with Nuts Installation Instructions

Warranty

TIE DOWN ENGINEERING Inc. warrants its products to be free from defects in material and workmanship for one year from the date of delivery to the original purchaser when properly installed, used, and maintained by the purchaser.

This warranty does not apply to damage or loss caused by any or all of the following circumstances or conditions:

Damage caused during installation.
Parts, accessories, materials, or components that are not obtained from or approved by TIE DOWN.
Misapplication, misuse, and failure to follow the directions or observe cautions and warnings on installation, operation, application, inspection, or maintenance specified in any TIE DOWN quotation, acknowledgement, sales literature, specification sheet, or installation instruction.
Use of product in any other application other than those described in TIE DOWN’s product information materials.
If your trailer leaves the United States. Except where specifically required by law, there is no warranty coverage on TIE DOWN Engineering trailer parts if the trailer is sold or registered in countries other than the United States.
Cosmetic damage, minor cosmetic abnormalities, and normal wear and tear, including (without limitation), scratches, dents, and chips.

If any TIE DOWN products are found, upon TIE DOWN's examination, to be defective, TIE DOWN will either credit the purchaser's account for the purchase price of the TIE DOWN product, or replace the TIE DOWN product, or repair the product.

TIE DOWN extends no warranty, express or implied, on products not manufactured by TIE DOWN or to TIE DOWN's design specifications, including, but not limited to, non-TIE DOWN tires, brakes, actuators, bearings, hose, and tubing. This warranty excludes all implied warranties of merchantability or fitness for a particular purpose or any purpose. This warranty does not cover nor extend to incidental or consequential damage. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Tie Down Engineering® 81085 - 1350 lb Idler Trailer Hub Kit with Nuts for 1-1/16" Straight Spindles

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!